Planting Guide

TUBESTOCK

Planting tubestock plants can be a great way to establish a new garden, reinvigorate an existing garden, or add colour and variety to your landscape. Here is a procedure for planting tube stock plants:

  • Choose the location: Determine the best location for the tube stock plants. Consider the amount of sunlight, soil type, drainage, and proximity to other plants.
  • Prepare the soil: Prepare the soil by digging a hole that is deep enough to accommodate the roots of the tube stock plant. Loosen the soil at the bottom of the hole and mix in some organic matter, such as compost or peat moss, to help the plant establish.
  • Water the tube stock plants: Before planting, water the tube stock plants thoroughly to help reduce shock and provide moisture for the roots during planting.
  • Remove the tube: Gently remove the tube from around the plant, being careful not to damage the roots.
  • Plant the tube stock: Place the tube stock plant in the hole and backfill with soil, making sure that the plant is at the same depth as it was in the tube. Gently firm the soil around the plant to eliminate any air pockets.
  • Water the plants: Water the plant thoroughly. Keep the soil moist for the first few weeks after planting to help the plant establish.
  • Mulch the plants: Mulch around the base of the plant with a layer of organic matter, such as bark chips or straw. This will help to retain moisture in the soil and keep the roots cool.
  • Care for the plants: Monitor the plants regularly and keep them watered and fertilized as needed. Remove any weeds or debris around the base of the plant, and prune as necessary to encourage healthy growth.

By following these steps, you can successfully plant tube stock plants and enjoy a beautiful and healthy garden.

45 – 100 Litre container stock

Planting 45 litre and 100 litre trees can be a challenging task, but with the right procedure, the tree will get a good start in life. Here’s a step-by-step guide on how to plant 45 litre and 100 litre trees:

  • Choose the location: Select a suitable location for the tree. Consider factors such as soil type, sun exposure, drainage, and available space.
  • Dig the hole: Dig a hole that is twice as wide as the root ball and deep enough to accommodate the entire root system. For a 45-liter tree, the hole should be about 60cm deep, and for a 100-liter tree, it should be about 80cm deep.
  • Prepare the hole: Loosen the soil at the bottom of the hole and mix in some organic matter such as compost, peat moss or well-rotted manure to improve soil quality.
  • Remove the tree from the container: Carefully remove the tree from its container. If the tree is tightly packed in the container, gently tap the container or squeeze the sides to loosen the root ball.
  • Inspect the root ball: Check the root ball for any damaged or circling roots. If there are any, gently prune them away.
  • Position the tree: Position the tree in the centre of the hole and ensure that the trunk is vertical.
  • Backfill the hole: Backfill the hole with soil, making sure that it is packed firmly around the root ball. Water the soil as you backfill to help eliminate any air pockets.
  • Install a support system: Install a support system such as a stake or tree guard to keep the tree upright and protect it from wind damage. Be sure to attach it well to the trunk of the tree.
  • Mulch the area: Mulch the area around the base of the tree with a layer of organic matter such as bark chips or straw. This will help to retain moisture in the soil and suppress weed growth.
  • Water the tree: Water the tree deeply immediately after planting, and then water it regularly for the first few weeks until it is established. During hot weather, water the tree twice a week

By following these steps, you can plant a 45 litre or 100 litre tree successfully, ensuring that it will thrive and grow to its full potential.

Ex- Ground

Planting an ex-ground tree can be a bit more challenging than planting a tree in a container, but it is still a great way to add beauty and value to your landscape. Here’s a step-by-step guide on how to plant an ex-ground tree:

  • Choose the location: Select a suitable location for the tree. Consider factors such as soil type, sun exposure, drainage, and available space.
  • Prepare the hole: Dig a hole that is twice as wide as the root ball and at least as deep as the root ball. Make sure that the hole is deep enough to accommodate the entire root system.
  • Inspect the root ball: Inspect the root ball for any damaged or circling roots. If there are any, gently prune them away.
  • Position the tree: Position the tree in the centre of the hole and ensure that it is straight.
  • Backfill the hole: Backfill the hole with soil, making sure that it is packed firmly around the root ball. Water the soil as you backfill to help eliminate any air pockets.
  • Install a support system: It is vital to install a support system such as a stake or tree guard to keep the tree upright and protect it from wind damage. Be sure to attach it firmly to the trunk of the tree.
  • Water the tree: Water the tree deeply immediately after planting and continue to water it regularly for the first few weeks until it is established. During hot weather, water the tree twice a week.
  • Prune the tree: Prune the tree to remove any damaged or dead branches, and to shape the tree to the desired form. Make sure to use clean, sharp tools to avoid damaging the tree.
  • Mulch the area: Mulch the area around the base of the tree with a layer of organic matter such as bark chips or straw. This will help to retain moisture in the soil and suppress weed growth.
  • Care for the tree: Monitor the tree regularly and keep it watered and fertilized as needed. Remove any weeds or debris around the base of the tree, and prune as necessary to encourage healthy growth. Avoid parking vehicles under the tree.

By following these steps, you can plant an ex-ground tree successfully, ensuring that it will thrive and grow to its full potential. However, it’s worth noting that ex-ground trees can be more susceptible to transplant shock than container-grown trees, so it’s important to take extra care to ensure their successful establishment.

Plant care guidelines

Proper care of plants after installing is essential to ensure their successful establishment and long-term health. Here are some general guidelines for caring for plants after installing:

  • Watering: It is best to plant in soil which is already moist, so watering the area the day before planting is a good idea. As well as that, immediately after installing the plants, give them a deep watering to settle the soil around the roots. Water regularly during the first few weeks until the plants have established their root systems. The frequency and amount of watering will depend on the plant species, soil type, and weather conditions. In general, it’s better to water deeply and less frequently rather than shallowly and frequently.
  • Mulching: Apply a layer of mulch around the base of the plants to help retain soil moisture, regulate soil temperature, and suppress weed growth. The mulch should be 2-3 inches deep, but be careful not to pile it up against the stem or trunk of the plant, as this can lead to rot and other problems.
  • Fertilizing: Depending on the plant species, it may be beneficial to fertilize them after installing. However, it’s generally best to wait a few weeks before applying any fertilizer to avoid burning the plants. When you do fertilize, use a slow-release or organic fertilizer, and follow the manufacturer’s instructions for application rates and timing.
  • Pruning: If any damaged or dead branches or leaves were not removed during planting, you can prune them after installation to encourage healthy growth. Be sure to use clean, sharp tools and make clean cuts to avoid damaging the plant.
  • Monitoring: Regularly check the plants for signs of stress or disease, such as wilting, yellowing leaves, or insect damage. Early detection and treatment of problems can help prevent more serious issues down the line.
  • Protection: Depending on the plant species, it may be necessary to protect them from extreme weather conditions, such as hot sun or strong winds. You can use shade cloth, windbreaks, or other protective measures to help the plants adjust to their new environment.

By following these care guidelines, you can help ensure the successful establishment of your newly installed plants and promote their long-term health and growth.